If you have been reading about AEDG and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Last reviewed on 2026-08-01. Where a claim depends on a specific study, the study is described rather than over-claimed.
Several names circulate for the same molecule, including epitalon, epithalone, epithalamin tetrapeptide, and the sequence code AEDG. A CAS registry number, 307297-39-8, is commonly cited for it, though catalogue entries should be checked against supplier documentation because mislabelled records occur. In its usual form the peptide carries free amino and carboxyl termini and is neither glycosylated nor lipidated. Researchers distinguish the defined tetrapeptide from epithalamin itself, a crude pineal preparation containing many peptides that is not chemically characterised.
Material supplied for laboratory use is normally a lyophilised white to off-white powder that dissolves readily in water and in isotonic saline. Lyophilised cakes are hygroscopic and should be equilibrated to room temperature before opening to limit condensation on the solid. Solutions are typically prepared at milligram-per-millilitre concentrations and divided into single-use aliquots, because repeated freeze–thaw cycles degrade short peptides. Aqueous solutions are far less stable than the dry powder, and identity is usually verified by mass spectrometry alongside purity estimation from reversed-phase high-performance liquid chromatography.
Epitalon is a synthetic linear tetrapeptide with the sequence alanine–glutamate–aspartate–glycine, abbreviated AEDG. Its molecular formula is C14H22N4O9 and the calculated mass is approximately 390.35 g/mol. The compound is made by solid-phase peptide synthesis rather than extracted from tissue, although early work described it as a short fragment of a peptide fraction obtained from bovine pineal extract. In the research literature the spelling epitalon and the variant epithalone both appear, while AEDG is the standard code used in peptide nomenclature.
Identity is normally established by reversed-phase high-performance liquid chromatography combined with mass spectrometry, a pairing that separates components and confirms molecular mass at once. Purity is quoted as a percentage from the chromatogram, and figures above ninety-five percent are a frequent commercial specification. Amino acid analysis or sequencing supplies further confirmation when required. Because many short peptides behave similarly under chromatography, retention time alone does not establish sequence; the mass measurement is what separates one tetrapeptide from another, and certificates should report both.
Short peptides such as AEDG are normally supplied as a freeze-dried solid and are kept dry, cold, and shielded from light. Holding at minus twenty degrees Celsius is common for the long term, while a refrigerator suffices for brief periods before use. The material takes up moisture to some degree, so containers should stay sealed and be allowed to reach room temperature before opening, which limits condensation on the contents. Repeated warming and cooling of a single container is discouraged because it admits water and can lower the amount of intact peptide.
| Property | Value | Notes |
|---|---|---|
| Amino acid sequence | Ala-Glu-Asp-Gly | Linear tetrapeptide, also written AEDG |
| Molecular mass | About 390.35 g/mol | Value calculated from the sequence |
| Appearance | White to off-white powder | Lyophilised material forms a loose cake |
| Solubility | Freely soluble in water | Also dissolves in isotonic saline |
| Storage | -20 °C, desiccated | Aliquot solutions to avoid freeze–thaw cycling |
The peptide is a synthetic analogue of epithalamin, a preparation extracted from bovine pineal glands. Investigators sought a short, chemically defined molecule that would reproduce some of the endocrine and gerontological observations attributed to the glandular extract. Proposed mechanisms centre on induction of telomerase activity, an effect reported in cultured human somatic cells in the early 2000s, together with influences on melatonin secretion and neuroendocrine regulation. Those mechanisms remain incompletely characterised, and the reported telomerase response has not been consistently reproduced by independent groups working in comparable systems.
Published work on this compound consists mainly of in vitro experiments, animal studies, and small clinical investigations, a substantial share of which appeared in Russian-language journals. Sample sizes are generally small, control conditions differ between studies, and several endpoints rely on markers whose clinical meaning is itself debated. Reviews of the longevity field treat the peptide as an early example of telomerase-directed research rather than an established intervention. Regulatory treatment varies by country: some jurisdictions place it under prescription controls, others treat it as a laboratory material, and importation may be restricted regardless of local status.
Identity testing for epitalon relies on reversed-phase high-performance liquid chromatography for purity and mass spectrometry for mass confirmation. Because the sequence contains no tryptophan or tyrosine, ultraviolet detection at 280 nanometres is insensitive, so chromatographic methods usually monitor absorbance near 214 nanometres, where the peptide backbone absorbs. Electrospray ionisation or matrix-assisted laser desorption/ionisation then checks the intact mass against the expected value near 390 daltons. Peptide mapping or amino acid analysis after acid hydrolysis can supplement these measurements, although such confirmatory work is seldom reported on commercial certificates of analysis.
Stability of the tetrapeptide follows ordinary peptide chemistry rather than any unusual structural feature. The aspartate-glycine pair is prone to aspartimide formation under mildly basic or neutral conditions, and deamidation can follow, altering both mass and chromatographic retention. Dry lyophilised powder kept at or below minus twenty degrees Celsius is the usual handling recommendation, with repeated freeze-thaw cycles avoided. Once dissolved in neutral aqueous buffer, degradation proceeds over days to weeks depending on pH and temperature, while acidic conditions generally slow the aspartimide route. A formal stability-indicating study has not been published in the indexed literature.
The compound is generally described as a synthetic analogue of a fragment isolated from a pineal gland extract. Researchers associated with the Saint Petersburg Institute of Bioregulation and Gerontology introduced it during the 1980s and 1990s while studying short peptides from animal tissue. The original extract, called epithalamin, is a heterogeneous mixture, whereas epitalon is a single defined sequence. That distinction matters because findings reported for the extract are not automatically findings about the pure tetrapeptide, and claims about broader biological effects remain a separate question from the chemical identity described here.
Residue composition is the property that most cleanly separates verified material from mislabelled samples. Alanine, glutamate, aspartate and glycine appear in that order from the N-terminus, and the two acidic residues sit in the middle of the chain. Because the peptide is short, it can be produced by solid-phase synthesis and characterised by mass spectrometry without ambiguity. Any reported sample whose measured mass departs substantially from 390 daltons is a different compound or a degraded mixture rather than epitalon.
Epitalon is a synthetic tetrapeptide whose four residues are alanine, glutamate, aspartate and glycine, commonly abbreviated AEDG. Its molecular formula is C14H22N4O9 and its monoisotopic mass is near 390.35 daltons. The peptide carries two acidic side chains, so it is neutral to negatively charged in most aqueous buffers. Published reference summaries usually list it under both spellings, epitalon and epithalon, and treat the two names as the same material.
Freeze-dried epitalon is normally kept at minus twenty degrees Celsius in a sealed, desiccated container, protected from light. Short excursions at ambient temperature during shipping are generally tolerated, but repeated warming and cooling cycles encourage moisture uptake, which shortens shelf life. Once dissolved, the peptide is far less stable than the solid: aqueous solutions are subject to hydrolysis and to deamidation at the aspartate and glutamate residues. Working solutions are therefore held refrigerated and used within days, and repeated freezing and thawing of the same vial is best avoided.
Identity and purity are checked by reversed-phase high-performance liquid chromatography, usually with ultraviolet detection near 214 nanometres, where the peptide bond absorbs. Mass spectrometry confirms the expected mass and reveals whether truncation products or adducts are present. Acid hydrolysis followed by amino acid analysis gives the residue ratio, which should approximate one alanine, one glutamate, one aspartate and one glycine. Counter-ions such as acetate or trifluoroacetate remain in the dried product and lower net peptide content, so a stated purity figure on a label does not by itself describe how much peptide a vial holds.
Regulatory treatment differs by country. No formulation of epitalon holds a marketing authorisation as a medicine in the United States or the European Union, where material sold for laboratory use is handled as a research chemical and is not intended for human consumption. In Russia, several short peptide preparations from the same institute's peptide series are registered medicinal products, and epitalon appears in that national context. Elsewhere it is frequently offered as a cosmetic ingredient, a category with lighter requirements. Advertising claims about longevity or disease prevention are restricted in most jurisdictions, which limits how sellers describe the compound.
The idea that a precise number of stages of grief exists is not supported in peer-reviewed research or objective clinical observation, let alone the five stages of grief model. 37 °C (98.6 °F) is not the normal or average temperature of the human body. That figure comes from an 1860 study, but modern research shows that the average internal temperature is 36.4 °C (97.5 °F), with small fluctuations. The cells in the human body are not outnumbered 10 to 1 by microorganisms. The 10 to 1 ratio was an estimate made in 1972; current estimates put the ratio at either 3 to 1 or 1.3 to 1. The total length of capillaries in the human body is not 100,000 km. That figure comes from a 1929 book by August Krogh, who used an unrealistically large model person and an inaccurately high density of capillaries. The true number is believed to be between 9,000 and 19,000 km. Wood smoke, for example from wood-burning stoves, is not a benign form of pollution because it is "natural", but is as harmful as other common forms of air pollution such as diesel fumes.
Dial up Dial down Pendant up Pendant down Pendant left Pendant right Temperature (from 34 to 100 degrees Fahrenheit (1 to 38 °C)) Isochronism (the ability of the watch to keep time, regardless of the mainspring's level of tension) Positional adjustments are attained by careful poising (ensuring even weight distribution) of the balance-hairspring system as well as careful control of the shape and polish on the balance pivots. All of this achieves an equalization of the effect of gravity on the watch in various positions. Positional adjustments are achieved through careful adjustment of each of these factors, provided by repeated trials on a timing machine. Thus, adjusting a watch to position requires many hours of labor, increasing the cost of the watch. Medium grade watches were commonly adjusted to 3 positions (dial up, dial down, pendant up) while high grade watches were commonly adjusted to 5 positions (dial up, dial down, stem up, stem left, stem right) or even all 6 positions. Railroad watches were required, after 1908, to be adjusted to 5 positions. 3 positions were the general requirement before that time. Early watches used a solid steel balance. As temperature increased, the solid balance expanded in size, changing the moment of inertia and changing the timing of the watch. In addition, the hairspring would lengthen, decreasing its spring constant. This problem was initially solved through the use of the compensation balance. The compensation balance consisted of a ring of steel sandwiched to a ring of brass. These rings were then split in two places.
When the blessed servant of God saw these things he was filled with wonder, but he did not know what the vision meant. He rejoiced greatly in the benign and gracious expression with which he saw himself regarded by the seraph, whose beauty was indescribable; yet he was alarmed by the fact that the seraph was affixed to the cross and was suffering terribly. Thus Francis rose, one might say, sad and happy, joy and grief alternating in him. He wondered anxiously what this vision could mean, and his soul was uneasy as it searched for understanding. And as his understanding sought in vain for an explanation and his heart was filled with perplexity at the great novelty of this vision, the marks of nails began to appear in his hands and feet, just as he had seen them slightly earlier in the crucified man above him. His wrists and feet seemed to be pierced by nails, with the heads of the nails appearing on his wrists and on the upper sides of his feet, the points appearing on the other side. The marks were round on the palm of each hand but elongated on the other side, and small pieces of flesh jutting out from the rest took on the appearance of the nail-ends, bent and driven back. In the same way the marks of nails were impressed on his feet and projected beyond the rest of the flesh. Moreover, his right side had a large wound as if it had been pierced with a spear, and it often bled so that his tunic and trousers were soaked with his sacred blood.
As mentioned above, G-proteins may terminate their own activation due to their intrinsic GTP→GDP hydrolysis capability. However, this reaction proceeds at a slow rate (≈0.02 times/sec) and, thus, it would take around 50 seconds for any single G-protein to deactivate if other factors did not come into play. Indeed, there are around 30 isoforms of RGS proteins that, when bound to Gα through their GAP domain, accelerate the hydrolysis rate to ≈30 times/sec. This 1500-fold increase in rate allows for the cell to respond to external signals with high speed, as well as spatial resolution due to limited amount of second messenger that can be generated and limited distance a G-protein can diffuse in 0.03 seconds. For the most part, the RGS proteins are promiscuous in their ability to deactivate G-proteins, while which RGS is involved in a given signaling pathway seems more determined by the tissue and GPCR involved than anything else. In addition, RGS proteins have the additional function of increasing the rate of GTP-GDP exchange at GPCRs, (i.e., as a sort of co-GEF) further contributing to the time resolution of GPCR signaling. In addition, the GPCR may be desensitized itself. This can occur as:
=== Blood pool labeling === When 99mTc is combined with a tin compound, it binds to red blood cells and can therefore be used to map circulatory system disorders. It is commonly used to detect gastrointestinal bleeding sites as well as ejection fraction, heart wall motion abnormalities, abnormal shunting, and to perform ventriculography.
Sources: en.wikipedia.org
== Electrochemistry == The electrochemical reactants in a lithium-ion cell are the materials of the electrodes, both of which are compounds containing lithium atoms. Although many thousands of different materials have been investigated, only a very small number are commercially usable. All commercial Li-ion cells use intercalation compounds as active materials. The negative electrode is usually graphite, although silicon is often mixed in to increase the capacity. The electrolyte is usually lithium hexafluorophosphate, dissolved in a mixture of organic carbonates. A number of different materials are used for the positive electrode, such as LiCoO2, LiFePO4, and lithium nickel manganese cobalt oxides. During cell discharge the negative electrode is the anode and the positive electrode the cathode: electrons flow from the anode to the cathode through the external circuit. An oxidation half-reaction at the anode produces positively charged lithium ions and negatively charged electrons. The oxidation half-reaction may also produce uncharged material that remains at the anode. Lithium ions move through the electrolyte; electrons move through the external circuit toward the cathode where they recombine with the cathode material in a reduction half-reaction. The electrolyte provides a conductive medium for lithium ions but does not partake in the electrochemical reaction. The reactions during discharge lower the chemical potential of the cell, so discharging transfers energy from the cell to wherever the electric current dissipates its energy, mostly in the external circuit.
While BK began its foray into locations outside of the continental United States in 1963 with a store in San Juan, Puerto Rico, it did not have an international presence until several years later. Shortly after the acquisition of the chain by Pillsbury, it opened its first Canadian restaurant in Windsor, Ontario in 1969. Other international locations followed soon after, including Australia in 1971, with a restaurant in the Perth suburb of Innaloo, and Europe in 1975, with a restaurant in Madrid. Beginning in 1982, BK and its franchisees began operating stores in several East Asian countries, including Japan, Taiwan, Singapore and South Korea. Due to high competition, all of the Japanese locations were closed in 2001; however, BK reentered the Japanese market in June 2007. BK's Central and South American operations began in Mexico in the late 1970s and by the early 1980s in Caracas, Venezuela, Santiago, Chile, and Buenos Aires, Argentina. While Burger King lags behind McDonald's in international locations by over 12,000 stores, as of 2008 it had managed to become the largest chain in several countries including Mexico and Spain.
=== 20th century === In the 1930s, Alfred Treibs determined the biological origin of petroleum, which was previously controversial. Access to oil was a major factor in several military conflicts of the 20th century, including World War II, during which oil facilities were a major strategic asset and were extensively bombed. The German invasion of the Soviet Union included the goal to capture the Baku oilfields, as it would provide much-needed oil supplies for the German military which was suffering from blockades. Oil exploration in North America during the early 20th century led to the U.S. becoming the leading producer by mid-century. As petroleum production in the U.S. peaked during the 1960s, the United States was surpassed by Saudi Arabia and the Soviet Union in total output. During the 1973 oil crisis, Saudi Arabia and other Arab nations imposed an oil embargo against the United States, the United Kingdom, Japan and other Western nations which supported Israel in the Yom Kippur War. This was followed by the 1979 oil crisis, which was caused by a drop in oil production in the wake of the Iranian Revolution and caused oil prices to more than double. The two oil price shocks had many short and long-term effects on global politics and the global economy. They led to sustained reductions in demand as a result of substitution to other fuels, especially coal and nuclear, and improvements in energy efficiency, facilitated by government policies.
== External links == International Rett Syndrome Foundation Rett UK Support and Research Charity Reverse Rett UK Rett Registry UK Rett Syndrome Research Trust Ensembl Gene ref Protein ref GeneCard RettBASE: IRSA MECP2 Variation Database Archived 2005-12-17 at the Wayback Machine GeneReview/NIH/UW entry on MECP2-Related Disorders GeneReviews/NCBI/NIH/UW entry on MECP2 Duplication Syndrome UK Site for Families Affected by MECP2. Site for Families Affected by MECP2. Site officiel français sur la duplication MeCP2
Sources: en.wikipedia.org
=== History === Commercial production of ethylene oxide dates back to 1914 when BASF built the first factory which used the chlorohydrin process (reaction of ethylene chlorohydrin with calcium hydroxide). The chlorohydrin process was unattractive for several reasons, including low efficiency and loss of valuable chlorine into calcium chloride. More efficient direct oxidation of ethylene by air was invented by Lefort in 1931 and in 1937 Union Carbide opened the first plant using this process. It was further improved in 1958 by Shell Oil Co. by replacing air with oxygen and using elevated temperature of 200–300 °C (390–570 °F) and pressure (1–3 MPa (150–440 psi)). This more efficient route accounted for about half of ethylene oxide production in the 1950s in the US, and after 1975 it completely replaced the previous methods. The production of ethylene oxide accounts for approximately 11% of worldwide ethylene demand.
The history of ethanol as a fuel spans several centuries and is marked by a series of significant milestones. Samuel Morey, an American inventor, was the first to produce ethanol by fermenting corn in 1826. However, it was not until the California Gold Rush in the 1850s that ethanol was first used as a fuel in the United States. Rudolf Diesel demonstrated his engine, which could run on vegetable oils and ethanol, in 1895, but the widespread use of petroleum-based diesel engines made ethanol less popular as a fuel. In the 1970s, the oil crisis reignited interest in ethanol, and Brazil became a leader in ethanol production and use. The United States began producing ethanol on a large scale in the 1980s and 1990s as a fuel additive to gasoline, due to government regulations. Today, ethanol continues to be explored as a sustainable and renewable fuel source, with researchers developing new technologies and biomass sources for its production.
==== Ranges ==== Each Range comprises two or more districts or one district divided into multiple police districts. The Range is headed by a Deputy Inspector General of Police (DIG). In West Bengal there are 10 ranges. Besides, there are DIG ranked officers in the department of Traffic, Railways, States Crime Records Bureau (SCRB), CID West Bengal, Anti Corruption Bureau (ACB), AP Barrackpore, AP Eastern Frontier Rifles (EFR) Salua, AP North Bengal, AP Durgapur, AP Siliguri, Border, Enforcement Bureau (EB), Intelligence Bureau, Fire Services, Headquarter (HQ), Police Training Center (PTS), Training, Personnel & Weapon, Provisioning, Telecommunication, WBNVF, Civil Defence etc.
Sources: en.wikipedia.org
It is a synthetic tetrapeptide. Its sequence was derived from research on peptide fractions of bovine pineal extract, and the intact AEDG sequence has not been demonstrated as an abundant free peptide in human tissue.
AEDG is the one-letter code for the four amino acids alanine, glutamate, aspartate and glycine in that order. The same molecule is written in three-letter form as Ala-Glu-Asp-Gly.
Identity is normally confirmed by mass spectrometry against the calculated mass of roughly 390.35 g/mol. Purity is then estimated by reversed-phase high-performance liquid chromatography with ultraviolet detection.
Reversed-phase high-performance liquid chromatography is run alongside mass spectrometry. The chromatogram separates components and gives a purity figure, while the mass spectrum confirms that the measured molecular mass matches the expected sequence. Neither measurement on its own is treated as sufficient.